Do You Want To Change The Daily Heating / Cooling Periods - Siemens Synco 700 Manuel D'utilisation

Do you want to change the daily heating / cooling periods?

General
In the time program, you can set the daily heating /
cooling periods to suit your individual needs. Each day
can accommodate a maximum of 6 switching points; a
room setpoint is assigned to each time period.
In addition to the weekdays (Monday through Sunday),
you can program a special day, that is, a special 24-hour
heating / cooling program.
The special day will be activated when you make an
entry on the Holidays / special days menu (
Changes on the central control unit can only be made if
the heating program is predefined by the time switch in
the controller. If the program is defined by an external
operator station, changes to the program can only be
made from that station.
16
Siemens Building Technologies / HVAC Products
page 18).
Welcome > Main menu > Room group 1... > Time switch...
Path:
Before making entries, please observe
• First, always enter the start time of the heating / cool-
ing period, then the room operating mode for that pe-
riod
• You have the room operating modes
choose from. Set the setpoints on menu Room temp
setpoint... ( page 11)
• You can copy any 24-hour heating / cooling program
to other days (
Changing and canceling times and setpoints
1. Select the required day.
2. In the diagram, advance pointer
time to be changed.
3. Set the required time.
Reset the time via 00:00 until ––:–– appears.
4. Select the required operating mode.
5. If required, set additional times and select additional
setpoints.
CE1B3121x2-en
, , and
page 17)
to the point in
74 319 0462 0 a
to
15.04.2005