Selecting The Room Groups' Operating Modes - Siemens Synco 700 Manuel D'utilisation

Selecting the room groups' operating modes

The ventilation / air conditioning plant was switched on
by your HVAC specialist.
On submenus Room group 1...10 > Room operating mode...,
he selected , which acts on the relevant room
group.
In that case, that room group operates automatically.
The control system switches automatically. Reasons can
be:
• Yearly or 7-day time switch program
• Interventions via a room unit
• Night cooling
• Fire alarm off
• Smoke extraction
• External commands via the signal inputs
Welcome > Main menu > Room group 1... > Room operating mode... > Preselection: > ...
Path:
8
Siemens Building Technologies / HVAC Products CE1B3121x2-en 74 319 0462 0 a 15.04.2005