iwc 5035 Mode D'emploi page 30

s e t t i n g y O u r W a t c h c O r r e c t l y
To set your watch correctly, proceed as follows:
– Wind the movement (approximately 20 revolutions of the crown).
– Pull out the crown to position 2 and turn the hands forwards to
approximately 4.40 a.m. This ensures that the calendar mechan-
ism is not in the middle of the automatic switching phase.
– Push the crown to position 0 and pull it back to position 1.
– Turn the crown slowly but continuously to the left. The date
and the month now advance in steps. Set the display to yester-
day's date and turn the crown slowly but continuously to the
right to set the day.
– Pull out the crown to position 2. This will stop the movement.
To set the time accurately to the second, it is best to stop the
movement as the seconds hand passes 60.
– Turn the hands forwards until the date display changes to today's
date. The hands will now be positioned between 2 a.m. and
3 a.m.
p O r t u g i e s e r a n n u a l c a l e n d a r
— 3 0 —