Publicité
Les langues disponibles
Les langues disponibles
iMPOrTanT inSTruCTiOnS
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
1.
Read all instructions before using this appliance.
2.
Disconnect all power supplies before performing any
cleaning, maintenance or relocation of the unit.
3.
Do not modify any of the pumps. use them only
as described in this manual. Any other use not
recommended by the manufacturer may cause electric
shock or injury to persons.
4.
Do not operate the unit with any damaged cords, if any
of the pumps have malfunctioned, if the tanks or piping
have been damaged in any manner.
5.
The Solar Hot Water System is only to be filled in its cold
condition. If required, cover the solar collector during
installation.
Warning: High temperatures of solar panels and heat
transfer solution may result in scalding!
6.
Solar Hot Water Systems can absorb high temperatures.
There is a danger of burning! Be careful when installing
or inspecting the temperature sensor.
7.
Consult the MSDS sheets or Safety Data Sheets for
information on the heat transfer solution before filling or
draining the system.
8.
Installers of this product should follow guide lines for
safety for proper transportation and manipulation of the
solar collector on/to the roof set out by Local Health and
Safety Acts.
9.
only a trained and competent person should install this
system.
10.
Dimplex does not accept any liability for damage done to
persons or property resulting from undue handling and
usage of this product.
11.
All regulations current at the time of installation are to be
considered alongside the content of this manual as they
form the code of best practice.
12.
It is the responsibility of the owner/Installer to ensure
that the transport, storage, installation and operation of
the product is carried out in a safe manner.
13.
When making the piping connections, make sure that
connecting pipe work is not mechanically over-stressed.
over time this could cause breakages, with consequent
liquid losses which, in turn, could cause harm to property
and/or people.
SaVE THESE inSTruCTiOnS
4
All manuals and user guides at all-guides.com
Disclaimer
The information presented in this manual was correct at the
time of print and was prepared with the greatest diligence
and care possible. The manufacturer does not take any
responsibility for damage done to property or life by not
adhering to the instructions given in this guide. The right is
reserved to introduce technical alterations without prior notice
as part of the company's continuous improvement measures.
All personnel specifying or designing the use of this equip-
ment, installing, operating or maintaining it must be appro-
priately trained or instructed and must follow the procedures
laid out in this guide and other related and relevant literature
including standards and regulations.
Always use a qualified technician or service
agency to repair this system.
!
nOTE: procedures and techniques that are
considered important enough to emphasize.
CauTiOn: procedures and techniques which,
if not carefully followed, will result in damage to
the equipment.
Warning: procedures and techniques which,
if not carefully followed, will expose the user to
the risk of fire, serious injury, or death.
www.renewables.dimplex.com
Publicité
