Motor Settings; Checking The Play In The Throttle Cable - Sherco 250 SE-R Manuel Du Propriétaire

Motor settings

CHECKING THE PLAY IN THE THROTTLE CABLE

n Checking the throttle cable play
n Adjusting the play in the throttle cable
1
With the handlebars facing straight ahead, check
that the throttle twist grip functions properly.
Throttle cable play
If the cable play is not correct, adjust the
accelerator throttle cable play. (
Start the bike and let it run at idle. Turn the hand-
lebars and check that the idle speed is constant.
If the speed changes, readjust the play in the
throttle cable. ( below)
☛
Adjust the throttle cable play at the location
shown with the adjuster.
1
2....4mm
below)
☛
93