Reinstalling The Fuel Tank; Purging The Air From The Forks - Sherco 250 SE-R Manuel Du Propriétaire

REINSTALLING THE FUEL TANK

2
3

PURGING THE AIR FROM THE FORKS

1
Reassembly of the fuel tank. Be sure to correctly
position the throttle
Locate all of the fuel hoses / electrical connections
under the fuel tank well.
1
Install the tank by moving the radiator guards away
from the radiator to provide clearance for the fuel tank
and makesure that all of the cables, wires and hoses
are free, clear and not pinched. Check the adjustment
of the radiator guards in relationship to the fuel tank.
Connect the fuel line
Install the fuel tank mounting screws
their rubber inserts.
Install the radiator grill mounting screws.
Chassis screws
Install the fuel vent hose.
Reinstall the saddle (
After some time of operation, the air accumulates
under pressure in the fork.
Every 5 to 10 hours (depending on the riding
intensity), it should be purged. With the fork cold
and fully extended, loosen and then retighten
both fork caps.
and clutch cable
1 2
.
3
along with
4
M6 10Nm
p.108)
☛
4
.
111