Engine Maintenance; Checking The Engine Oil Level; Draining The Gear Box Oil - Sherco 250 SE-R Manuel Du Propriétaire

250-300 SE/R

Engine maintenance

CHECKING THE ENGINE OIL LEVEL

2

DRAINING THE GEAR BOX OIL

1
2
98
- Make sure that the bike is on its two wheels ,
vertical and on a horizontal surface.
- Check the gear oil level , the oil should flow out
1
of the screw opening
If necessary add oil to achieve the correct oil
level.
- unscrew the engine oil filer cap 2 located
on the clutch housing
Topping up the engine oil
Engine oil
ATTENTION
- Improved oil level can damage your engine .
- Do not use bike if the level is below the minimum .
- Remove the engine guard (
- When draining the oil the engine should
be warm.

ATTENTION
Use protective gloves.
- Position the motorcycle upright on a level
surface.
- Place a container under the bike to catch
the old oil.
- Remove the drain plug
- Remove the drain plug
- Allow the oil to drain
- Clean the drain plugs
degreaser.
1
.
2
SAE 10W40
p.115)
☛
1
2
and with a
1 2