Yamaha Z250D Manuel D'utilisation page 146

4-5
EMU01211
1) Wash the motor body using fresh water.
(Refer to the section "MOTOR EXTERI-
OR" for details.)
2) Remove the fuel-line connection(s) or
shut off the fuel cock, if equipped.
3) Run the engine at idling speed supply-
ing fresh water to flush the cooling-
water passages until the fuel system
becomes empty and the engine stops.
(Refer to the section "FLUSHING
COOLING SYSTEM" for details.)
4) Remove the battery for electric start
models. (Refer to the section "DISCON-
NECTING THE BATTERY" for details.)
5) Drain the cooling water completely out
of the motor.
Clean the body thoroughly.
EMU00337
Fuel Tank
1) Drain the fuel from the tank for a long
period of storage.
2) Store the fuel tank in a dry, well-venti-
lated place, not in direct sunlight.
w
The fuel tank supplied with this engine is
its dedicated fuel reservoir and must not
be used as a fuel storage container.
Commercial users should conform to rel-
evant licensing or approval authority
regulations.
E