Yamaha Z250D Manuel D'utilisation page 110

N
3-13
701015
N
702025
000568
ON ON
OFF START OFF START
000714
EMU00248
PROCEDURE FOR REMOTE
CONTROL MODELS
4) Place the remote control lever in the
Neutral position.
NOTE:
The start-in-gear protection device permits
the engine to be started only when it is in
Neutral.
5) Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then, install the lock plate
on the other end of the lanyard in the
engine stop switch.
w
8 Attach the engine stop switch lanyard
to a secure place on your clothing,
your arm or leg while operating.
8 Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
8 Avoid accidentally pulling the lanyard
during normal operation. Loss of
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly.
This could cause people and objects
in the boat to be thrown forward.
E