Replacing Fuse - Yamaha Z250D Manuel D'utilisation

E
EMU01330
t
w
e

REPLACING FUSE

If a fuse has blown, remove the electrical
e
r
cover, open the fuse holder and remove the
fuse with a fuse puller. Replace it with a
spare one of proper amperage.
q
w
r
Be sure to use the specified fuse. An
e
incorrect fuse or a piece of wire may
001584
allow excessive current flow. This could
cause electrical system damage and a
fire hazard.
t
e
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
1 Electrical cover
2 Fuse holder
3 Fuse (20A, 30A, 100A)
001585
4 Spare fuse (20A, 30A, 100A)
5 Fuse puller
5-7