Getting Started - Husqvarna AUTOMOWER 405X Manuel D'utilisation

• To switch off the product, push the ON/OFF button
for 3 seconds and check that the indicator lamp is
not lit.
34.2 Operating mode, START
Push the START button to select one of the following
operating modes:
• Main area: The standard operating mode where
the product mows and charges automatically.
Secondary area: When mowing secondary areas
•
this setting must be chosen.
Secondary area mode, the operator must move
In the
the product manually between the main area and the
secondary area. The product mows until the battery is
empty. When the battery is charged, the product moves
out of the charging station and stops. The product is
now prepared to start operation, but needs confirmation
from the operator first.
Note:
If you want to cut the main area after the battery
is charged, set the product to
placing it in the charging station.
Override Schedule: Any Schedule settings made
•
can be temporarily overridden by selecting
Override schedule . It is possible to override the
Schedule for 24 h or 3 days.
Spot Cutting: The product works in a spiral pattern
•
to cut the grass where it has been mown less than
in other parts of the lawn.
Spot Cutting function is activated with the
The
START button. You can select how the product
should continue to work once mowing is finished
by pushing the right arrow button and then
Main Area or Secondary Area .
specifying
34.3 Operating mode, PARK
Push the PARK button to select one of the following
operating modes:
1508 - 004 - 22.12.2020
Main area mode before
Park until further notice: The product stays in the
•
charging station until another operating mode is
selected by pushing the START button.
Start again in 3 hours: The product stays in the
•
charging station for three hours and then
automatically returns to normal operation. This
operation mode is suitable when there is a need to
pause operation, e.g. for temporary irrigation or for
games on the lawn.
• Start with schedule: The product stays in the
charging station until the next schedule setting
permits operation. This operating mode is suitable
if one wishes to cancel an ongoing mowing cycle
and allow the product to stay in the charging
station until the next day. This option is not
displayed if there are no schedule settings.
34.4 Connectivity
You can communicate with your product through the
mobile application Automower
Connect is available for your mobile device and tablet
(Apple or Android). With Automower
activated, new icons will be displayed on the product's
display. For more detailed information, refer to complete
Operator's manual.
Note:
All countries do not support Automower
Connect because of legal reasons and regional
specified cellular systems. The included Automower
Connect lifetime service only applies if there is a third
part sub-supplier of 2G/3G/4G available in the
operational area. In some countries Bluetooth
available due to legal reasons.
®
34.4.1 Automower Connect
Automower ® Connect brings the menu system to your
smartphone, making it easy to read and change the
product settings remotely. Through this application, you
can receive the product's current status and send
commands to the product from anywhere in the world. In
case of theft, you get an alarm and are be able to track
your product's position. Some countries do not support
®
Automower Connect due to region specific cellular
systems. Contact your local Husqvarna representative
for more information.

34.4.2 Getting started

Download the Automower Connect app from AppStore
or GooglePlay. Once you have downloaded the app, you
can specify an e-mail address and a password to create
an account. You will receive a validation e-mail to the e-
mail address you specified. Follow the instructions in the
e-mail within 24 hours to validate your account. If not
validated within 24 hours, you will have to create your
account again. When the account has been created in
the app you can pair the product and your smartphone.
® ®
Connect. Automower
®
Connect
®
®
®
is not
Operation - 87