Husqvarna AUTOMOWER 405X Manuel D'utilisation page 73

31 Introduction...................................................73
32 Safety........................................................... 76
33 Installation.................................................... 79
34 Operation......................................................86
35 Maintenance................................................. 88
31.1 Introduction
Serial number:
PIN code:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.husqvarna.com.
31.2 Support
For support about the product, speak to your Husqvarna
servicing dealer.
31.2.1 Complete Operator's Manual
A complete operator's manual is available in the
Automower ® Connect app and on Husqvarna's website
www.husqvarna.com. It is more in detail about e.g.
instructions about installation, maintenance,
troubleshooting and menu structure.
31.2.2 Product description
Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
73 .
The product is a robotic lawn mower. The product has a
battery power source and cuts the grass automatically.
Collection of grass is not necessary.
The operator selects the operation settings with the
buttons on the keypad. The display shows the selected
and possible operation settings, and the operating mode
of the product.
The boundary wire and the guide wire control the
movement of the product within the work area.
®
31.2.2.1 Automower Connect
®
Automower Connect is a mobile application that makes
it possible to select the operation settings remotely.
Refer to Connectivity on page 87 .
1508 - 004 - 22.12.2020
Contents
36 Troubleshooting............................................89
37 Transportation, storage and disposal........... 90
38 Technical data.............................................. 91
39 Warranty....................................................... 94
40 EC Declaration of Conformity....................... 94
31 Introduction
31.3 Capacity
How big an area the product can keep cut depends
primarily on the condition of the blades and the type,
growth and moisture of the grass and the product
configuration. The shape of the yard is also significant. If
the yard mainly consists of open lawn areas, the product
can mow more per hour than if the yard consists of
several small lawns separated by trees, flower beds and
passages. For working capacity, refer to
on page 91 .
It is recommended to allow the product to mainly mow in
dry weather to obtain the best possible result. The
product can also mow in rain, however wet grass easily
sticks on the product and there is a greater risk of
Support on page
slipping in steep slopes. The blades must be in good
condition to obtain the best mowing result. In order to
keep the blades sharp for as long as possible it is
important to keep the lawn free from branches, small
stones and other objects. Replace the blades regularly.
Refer to
The Automower
each day because of the maximum capacity of the
product. The operating time that includes cutting,
searching and charging is approximately 9-10 hours
each day.
31.4 Movement pattern
The movement pattern of the product is random. This
means that the lawn is mown evenly without any
mowing lines.
Replace the blades on page 89 .
®
405X has a maximum cutting time
Technical data
Introduction - 73