Getting Started; Adjusting The Cutting Height; To Adjust The Cutting Height - Husqvarna AUTOMOWER 430XH Manuel D'utilisation

then automatically returns to normal
operation. This operation mode is suitable
when there is a need to pause operation,
for example for temporary irrigation or for
games on the lawn.
Start with Schedule: The product stays in
•
the charging station until the next
Schedule setting permits operation. This
operating mode is suitable if one wishes
to cancel an ongoing mowing cycle and
allow the product to stay in the charging
station until the next day. This option is
not displayed if there are no
settings.
4.4 Connectivity
You can communicate with your product
through the mobile application Automower
®
Connect. Automower Connect is available for
your mobile device and tablet (Apple or
Android). With Automower
activated, new icons will be displayed on the
product's display. For more detailed
information, refer to complete Operator's
manual.
Note:
All countries do not support
®
Automower Connect because of legal
reasons and regional specified cellular
systems. The included Automower
lifetime service only applies if there is a third
part sub-supplier of 2G/3G/4G available in the
operational area.
®
4.4.1 Automower Connect
®
Automower Connect brings the menu system
to your mobile device, making it easy to read
and change the product settings remotely.
Through this application, you can receive the
product's current status and send commands
to the product from anywhere in the world. In
case of theft, you get an alarm and are be
able to track your product's position.

4.4.2 Getting started

Download the Automower Connect app from
AppStore or GooglePlay. Once you have
downloaded the app, you can specify an e-
mail address and a password to create an
account. You will receive a validation e-mail to
14 - Operation
Schedule
®
®
Connect
®
Connect
the e-mail address you specified. Follow the
instructions in the e-mail within 24 hours to
validate your account. If not validated within
24 hours, you will have to create your account
again. When the account has been created in
the app you can pair the product and your
smartphone.
4.4.3 Pair with Automower
Accessories > Automower
Select the function
Connect > Pairing > New pairing . When the
app prompts you to do so, enter the 6-digit
code shown on the product display. Also enter
your chosen name of the product into the app.
®
Automower Connect is always connected to
your product as long as the mobile device
have contact with the mobile network and the
product is charged and the product is switched
on.

4.5 Adjusting the cutting height

If the grass is long, let the product start
mowing at the MAX cutting height. Once the
grass is shorter, you can gradually lower the
cutting height.
CAUTION:
During the first week
after a new installation, the cutting
height must be set to MAX to avoid
damaging the loop wire. After this,
the cutting height can be lowered
one step every week until the
desired cutting height has been
reached.

4.5.1 To adjust the cutting height

The cutting height can be varied from MIN to
MAX in 9 steps.
1. Push the STOP button to stop the product
and open the hatch.
2. Push the MENU button to access the
main menu.
3. Move the cursor using the up/down arrow
buttons to select menu
4. Push OK.
5. Increase/Decrease the cutting height with
the arrow buttons.
1352 - 001 - 09.12.2019
®
Connect
Cutting height .