Menu Structure; Browse Between Menus - Husqvarna AUTOMOWER 430XH Manuel D'utilisation

3.5 Menu structure

The main menu for the product offers 8
options.
3.6 Submenus
There are a number of submenus under each
option. You can access all the functions to set
the product settings via the submenus.
Certain submenus contain options that are
ticked off to the left. This means that these
options are selected. Check or uncheck the
box by pushing the OK button.

3.7 Browse between menus

Browse through the main menu and
submenus with the help of the arrow buttons.
Enter values and times using the number
buttons and confirm each selection with the
OK button. Push BACK to go up a step in the
menu or keep the MENU button pushed in for
2 seconds to go directly to the main menu.
3.8 Main menu
Schedule
The lawn should not be cut too
often to obtain the best mowing
result. Consequently, it is
important to limit the operating
time using the
the work area is less than the
product's work capacity. The
Schedule function is also an ideal
tool to control which periods the
product should not mow, for
example when children are playing
on the lawn.
Cutting height
The cutting height can be varied
from MIN (1) to MAX (9). During
the first week after a new
installation, the cutting height must
be set to MAX to avoid damaging
the loop wire. After this, the cutting
height can be lowered one step
12 - Installation
Schedule function if
every week until the desired
cutting height has been reached.
Security
In this menu, settings relating to
security and the connection
between the product and the
charging station can be made.
There are 3 security levels to
Low , Medium , High .
choose from:
Messages
Historical fault and information
messages can be read in this
menu. For some of the most
common fault messages, there are
tips and advice to help you rectify
the fault.
Weather timer
This function allows the product to
automatically adjust its mowing
times based on how much the
lawn grows. When the weather is
good for grass growth, the product
mows more often and when grass
growth is low the product
automatically spends less time on
the lawn.
Installation
This menu function is used to
customize the installation. For
many work areas there is no need
to alter the factory settings, but
depending on the lawn complexity
the mowing result can be
improved by making manual
settings.
Settings
This selection allows you to make
changes to the general product
settings such as date and time.
1352 - 001 - 09.12.2019