Automower ® Connect; Getting Started; Adjusting The Cutting Height; To Adjust The Cutting Height - Husqvarna AUTOMOWER 430XH Manuel D'utilisation

PARK UNTIL FURTHER NOTICE . The
•
product stays in the charging station until
another operating mode is selected by
pressing the START button.
START AGAIN IN 3 HOURS . The product
•
stays in the charging station for three hours
and then automatically returns to normal
operation. This operation selection is
suitable when there is a need to pause
operation, e.g. for temporary irrigation or for
games on the lawn.
START WITH NEXT TIMER . The product
•
stays in the charging station until the next
Timer setting permits operation. This
operation selection is suitable if one wishes
to cancel an ongoing mowing cycle and
allow the product to stay in the charging
station until the next day. This option is not
displayed if there are no Timer settings.
4.3 Connectivity
You can communicate with your product through
the mobile application Automower
®
Automower Connect is available for your
smartphone and tablet (Apple or Android). With
®
Automower Connect activated, new icons will
be displayed on the product's display. For more
detailed information, refer to complete Operator's
manual.
®
4.3.1 Automower Connect
®
Automower Connect brings the menu system to
your smartphone, making it easy to read and
change the product settings remotely. Through
this application, you can receive the product's
current status and send commands to the
product from anywhere in the world. In case of
theft, you get an alarm and are be able to track
your product's position. Some countries do not
®
support Automower Connect due to region
specific cellular systems. Contact your local
Husqvarna representative for more information.

4.3.2 Getting started

Download the Automower Connect app from
AppStore or GooglePlay. Once you have
downloaded the app, you can specify an e-mail
address and a password to create an account.
1039 - 001 - 18.01.2019
You will receive a validation e-mail to the e-mail
address you specified. Follow the instructions in
the e-mail within 24 hours to validate your
account. If not validated within 24 hours, you will
have to create your account again. When the
account has been created in the app you can pair
the product and your smartphone.
4.3.3 Pair with Automower
Select the function
Connect > Pairing > New pairing . When the app
prompts you to do so, enter the 6-digit code
shown on the product display. Also enter your
chosen name of the product into the app.
Automower
your product as long as the smartphone have
contact with the mobile network and the product
is charged and the main switch is set to

4.4 Adjusting the cutting height

If the grass is long, let the product start mowing
at the MAX cutting height. Once the grass is
shorter, you can gradually lower the cutting
®
Connect.
height.

4.4.1 To adjust the cutting height

The cutting height can be varied from MIN to
MAX in 9 steps.
1. Press the STOP button to stop the product
and open the hatch.
2. Press the MENU button to access the main
menu.
3. Move the cursor using the arrow keys up/
down to select menu
4. Press OK.
5. Increase/Decrease the cutting height with
the arrow keys.
®
Connect
Accessories > Automower
®
Connect is always connected to
CAUTION: During the first week after
a new installation, the cutting height
must be set to MAX to avoid damaging
the loop wire. After this, the cutting
height can be lowered one step every
week until the desired cutting height
has been reached.
Cutting height .
Operation - 13
1 .