Connecting Another Cd Player - Sony CDP-CX350 Mode D'emploi

Erasing all data stored in the remote
1
Press MENU.
Memo s e a r c h
P r o g r am p l a y
P r o g r am i n p u t
G r o u p s e l e c t
2
Move the cursor (") to "Set up" by using the Easy
scroll key, then press the Easy scroll key.
P l a y e r c h e c k
Memo l o a d i n g
C o n t r a s t a d j u s t
Memo r y c l e a r
3
Move the cursor to "Memory clear," then press the
Easy scroll key.
A l l memo r y
c l e a r OK ?
n o
y e s
4
If you want to erase all stored data, move the
cursor to "yes," then press the Easy scroll key.
A l l memo r y
c l e a r OK ?
n o
y e s
5
"All memory clear!" appears in the display when
all data is erased.
CD1
CD1
CD1
CD1

Connecting Another CD Player

If you have a Sony CD player in which 5, 50, 200, or
300 discs can be inserted and which is equipped with
the CONTROL A1 (or CONTROL A1) jack and the
command mode of that player can be set to CD 3, you
can control that player as the second player with this
unit. After connecting this unit and an amplifier, follow
the procedure below.
Be sure to turn off the power of each player before
making this connection.
To LINE OUT
To an AC outlet
To 2ND CD IN
To audio output
To an AC outlet
To audio input
: Signal flow
Getting Started
Getting Started Playing CDs
COMMAND MODE
CDP-CX350
CONTROL A1
CDP-CX230, etc.
To CONTROL A1
Amplifier
To an AC outlet
(Continued)
9 GB