Playing Using A Timer - Sony CDP-CX350 Mode D'emploi

Playing CDs
3
Select the desired program by pressing the Easy
scroll key up or down, then press Easy scroll key.
Program Play starts when the player finishes
loading the program data from the remote.
If the player fails in loading, the following
message appears. Press the Easy scroll key again.
Note
The program you create using the remote is stored in the
player as PROGRAM 1. Note that the PROGRAM 1 you had
created before is erased.
26 GB
CD1
P r o g r am
d a t a t r a n s f e r
CD1
D i s c 4
* D I SC 4 *
T r a c k 1
( TRACK 1 )
d a t a t r a n s f e r
f a i l u r e !
T r y a g a i n !

Playing Using a Timer

You can start playing a disc at any given time by
connecting a timer (not supplied). Refer also to the
instructions for the timer if you need help.
TIMER Play mode buttons
I / u
1
Press one of the play mode buttons to select the
desired play mode.
2
Set TIMER on the player to PLAY.
3
Set the timer to the desired time.
The player turns off. When the set time comes, the
player turns on and starts playing.
4
After you have used the timer, set TIMER on the
player to OFF.
+100