Connecting Another Cd Player - Sony CDP-CE535 Mode D'emploi

Getting Started

Connecting Another CD Player

If you have a Sony CD player in which 5, 50, 200, or
300 discs can be inserted and which is equipped with
the CONTROL A1
command mode of that player can be set to CD 3, you
can control that player as the second player with this
player. After connecting this player and an amplifier,
follow the procedure below.
Be sure to turn off the power of each player before
making this connection.
COMMAND
MODE
To 2ND CD IN
To audio output
To an AC outlet
: Signal flow
GB
6
(or CONTROL A1) jack and the
To LINE OUT
CDP-CE535
To CONTROL A1
To an AC outlet
CDP-CX300, etc.
To CONTROL A1
To audio input Amplifier
To an AC outlet
What cords will I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (supplied for Canadian
models only)
1
Connect the players with an audio cord (see also
"Hookups" on page 5).
CDP-CE535
2ND
LINE
CD
IN OUT
L
R
2
Connect the players with a monaural (2P) mini-
plug cord.
CDP-CE535
CONTROL A1
For details on this connection, refer to the
supplementary "CONTROL-A1
System" instructions.
3
Set the COMMAND MODE selector of each
player.
Set the COMMAND MODE selector of this player
to CD 1 or CD 2, and set that of the second player
to CD 3.
COMMAND
MODE
CD
1 2
For details on how to operate the second player,
see "Controlling Another CD Player" on page 18
and "Playing Alternately" on page 20.
CDP-CX300, etc.
LINE OUT
L
R
CDP-CX300, etc.
CONTROL A1
Control
3