Fading In Or Out - Sony CDP-CE535 Mode D'emploi

Recording From CDs
7
When you record on side B, reverse the tape and
press · or P on the player to resume playing.
To cancel Time Edit
Press CONTINUE.
You can program the tracks you want in advance
Select the tracks before doing the above procedure. The
player creates a program from the remaining tracks.
You can freely specify the tape length
Set the tape length using the ≠ AMS ± control in
Step 3.
Example: When the tape length of one side is 30 minutes
and 15 seconds
1 To set the minutes, turn ≠ AMS ± until
2 To set the seconds, turn ≠ AMS ± until
You can check and change the program
See page 18.
GB
22
"30" appears in the display, then push ≠
AMS ±.
"15" appears in the display, then push
≠ AMS ±.

Fading In or Out

You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
FADER EDIT/TIME FADE
To
Press FADER
Start play fading in
During pause.
the display and the Q indication
flashes. The play fades in.
End play fading out
When you want to start fading out.
FADE
the q indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 14), the play
fades out for about 2 seconds.
Changing the fading time
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don't change it, fading
lasts for 5 seconds.
1
Press FADER before you start playing.
"FADE 5 SEC" appears in the display.
2
Press 0/) to specify the fading time.
· P
0/)
FADE lights up in
lights up in the display and