Troubleshooting - Parkside Performance Pkhap 20-Li D4 Traduction Des Instructions D'origine

GB MT

Troubleshooting

The following table will assist you in fixing faults:
Problem
Device does not start
Poor drilling performance
Device works with interrup-
tions
40
Possible cause
Rechargeable battery (15)
not inserted
On/Off switch (7) is broken contact the service centre.
Rechargeable battery (15)
discharged
Defective motor
Drill blunt
Internal loose contact
On/Off switch (7) is broken
Troubleshooting
Insert the rechargeable
battery (see Inserting the
battery, p. 35)
Charge the battery (Char-
ging the battery, p. 34)
contact the service centre.
Change drill or grind if pos-
sible
contact the service centre.