Service, Maintenance And Spare Parts; Service And Maintenance; Spare Parts; Warranty - Kunzle & Tasin Bona Belt Manuel D'utilisation

Service, Maintenance and Spare Parts

Service and Maintenance

Bona Belt is a high quality machine and is tested by authorized
test staff at the factory before delivery. However, electrical and
mechanical parts wear down and age during long-term use.
In order to keep the machine in a safe and functioning
condition, service must be performed every 250 work hours
or least once a year. This service includes control of wheels,
cable stand, motor, tension device, sanding disc function is
controlled.
Only Bona's original parts may be used because the machine
is considered unique, otherwise safety functions can become
impaired.
Always disconnected the power cable to the machine before
it is cleaned, tools are changed, maintenance is performed or
when worn parts are replaced.
Spare Parts and exploded Views
On the Internet, you will find a list of spare parts and exploded
views for Bona Belt and other machines in our product range.
Visit http://spareparts.bona.com/
During the factory warranty period, repairs may only be carried
by Bona or staff approved by Bona. Other repairs (after the

Warranty

A 24 month factory warranty (from the date of invoice) against
material and manufacturing faults applies to Bona machines
and Bona DCS with accessories manufactured after 01-01-
2008.
Bona pledges to rectify material and manufacturing faults free
of charge provided that the machine, with paid freight, is sent
to us with the relevant warranty claim form describing the fault.
The factory warranty only covers new sales.
We do not undertake any other form of compensation or
liability to damages.
Transport damage or transport costs will not be compensated.
In the event of transport damage it is up to the receiver to
contact the relevant transport company for compensation.
The warranty does NOT cover faults that have occurred via
normal wear, incorrect spare parts, carelessness, incorrect
use, procedures without Bona approval or that the machine is
connected to incorrect current.
When you contact Bona or staff approved by Bona in the
event of a fault or to order spare parts, always specify the type
and serial number of your machine. This information is located
on the data plate of the machine.
The machine may never be cleaned using a high pressure
washer or hose.
All maintenance must be done on neutral machine!
Unplug from the wall outlet. Check cable and connectors
regularly. Always replace a damaged cord (slots, jacks or cable
connections) with a new original cable.
warranty period) of mechanical or electrical parts on the
machine may only be carried out by Bona or staff approved by
Bona who has experience and knowledge concerning safety
regulations.
THE WARRANTY DOES NOT COVER:
• Consumable materials such as wheels, electric cables,
abrasives, lamps, coal brushes, etc.
• Indirect damage, damage and errors that occur due to
external damage, accidents, poor maintenance, overload,
repairs performed outside of our knowledge and approval, or
damages for another reason outside of our control.
• With the use of parts produced by another company outside
of our control.
• Electrical components with current variations beyond what
has been specified in the manual.
• If payment for the machine is not made according to
agreement
In the event of a warranty claim, the machine or the agreed
part must be returned to us or our dealer for warranty testing
and for potential warranty repair or replacement.
During the factory warranty period, service or repairs may only
be carried out upon approval by a manager at Bona and only
performed by staff at Bona AB or approved staff at Bona AB .
EN
Bona Belt Manual
21 21