Bearings (Only For Tech Support Service); Spare Parts; Emergency Situations (For The User); Problem - Kunzle & Tasin Bona Scorpion Manuel D'utilisation

Routine Maintenance (Cont.)

Bearings (only for tech support service)

Check bearings regularly for wear or damage according to the following timescales:
Wheels:
Fan Shaft:
Sanding Drum:
Motor Shaft:

Spare Parts

Always use Bona/Künzle & Tasin spare parts.
Failure to use Bona/Künzle & Tasin spare parts, or repairs/adjustments carried out by unauthorized personnel, will invalidate the
guarantee and any resulting liability.
The machine must only be repaired by qualified personnel.
This electric equipment is compliant with the relevant safety legislation. Repairs must be carried out by qualified personnel using
Bona/Künzle & Tasin spare parts, otherwise the user may suffer serious injury.

Emergency Situations (for the user)

PROBLEM

Motor does not start
Insufficient motor speed
20
After the first 2500 hours
After the first 2500 hours
After the first 5000 hours
After the first 5000 hours

CAUSES

No power supply voltage
Insufficient voltage for unstable connections
Faulty switch
Faulty capacitor
Faulty motor
Excessive cable length or unsuitable cross section
Unstable connections
Driving belt at a wrong tension
Faulty capacitor
Faulty motor
Bona Scorpion Manual

SOLUTIONS

Check power supply or try on a different job-site
Contact an authorized Bona dealer
Contact an authorized Bona dealer
Replace it
Contact an authorized Bona dealer
Use cables of suitable length and cross section
Contact an authorized Bona dealer
Set it at a right one
Contact an authorized Bona dealer
Contact an authorized Bona dealer