Compliance With Safety Measures And Warnings - Kunzle & Tasin Bona Belt Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
Preventing Measures for Users (Cont.)

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings tightly
closed. Maintain machine settings in accordance with the
specifications.
Failure to comply with instructions on this machine and in
this manual may cause serious injury and/or damage. Read
and comply with all safety instructions. Ensure that all plates,
labels, warnings and instructions are secured to the machine.
New plates can be obtained from an authorized Bona dealer.
Preventing Measures for Users (Cont.)
Read this manual carefully and become familiar with
the machine.
The equipment is suitable for industrial use (e.g. in hotels,
schools, hospitals, offices, factories and shops). The following
information highlights particularly hazardous situations for the
1) Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3) DO NOT leave the machine unattended when the
motor is operating.
4) Always disconnect the power supply cable from the
machine before performing maintenance.
5) Transport the machine with care, due to the heavy
weight of the individual parts making up the machine.
6) Always use the machine in well-ventilated areas.
7) Always keep the work area well-lit.
Injury or damage may occur if maintenance operations or
repairs are carried out by any unauthorized personnel.
operator and/or machine. Understand when these conditions
may be present. Removing safety features could cause
death or physical injury. Take all steps necessary to instruct
personnel who may use the machine. Report any damage on
the machine or incorrect operation immediately.
8) Always dispose of the sanding dust appropriately.
9) DO NOT detach the dust bag when the motor
is operating.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive
specified in the instruction manual.
12) The use of accessories other than those
recommended in this manual may cause injury.
13) The machine is for indoor use only.
EN
Bona Belt Manual
11
11

Publicité

Table des Matières
loading

Table des Matières