Operator Safety - Kunzle & Tasin Bona Belt Manuel D'utilisation

Operator Safety

HAZARD means:
Serious injury or death may
occur to the operator or
others if 'HAZARD' warnings
on the machine or in this
manual are ignored or not
kept to. Read and follow all
'HAZARD' warnings on this
machine or in this manual.
Failure to read the Bona Edge machine manual before
operating, adjusting or performing maintenance oper-
ations on the machine could cause injury or damage to
persons or objects.
Anyone operating the machine should understand how to use
and operate it before starting it up.
KEEP AWAY FROM CHILDREN
Children should be supervised to ensure that they do not
play with the appliance. This machine is not intended for use
by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge
unless they have received instructions regarding the use and
are supervised by a person responsible for their safety.
Sanding may create an explosive environment. Cigarettes,
cigars, pipes, lighters, pilot flames, or any other source of fire
may create an explosion, if lit during sanding operations. All
sources of ignition should be removed entirely from the work
area.
Poorly ventilated work areas may create an explosive
environment, when some combustible materials (solvents,
thinners, alcohol, fuel, some paints, wood dust, etc) are
present in the atmosphere. Floor sanding may cause various
materials and fumes to ignite. Read the manufacturer's
instructions for each chemical product used and establish its
combustibility.
WARNING means:
Injury may occur to the
operator or others if
'WARNING' notices on the
machine or in this manual are
ignored or not kept to. Read
and follow all 'WARNING'
notices on this machine or in
this manual.
Always keep the work area well-ventilated.
Striking nails when sanding may generate an explosion or
fire. Always ensure all nails are sunk before sanding surfaces.
Serious injury and/or death due to electrocution may occur,
if the power supply circuit trips repeatedly or is undersized.
Have the fuses, safety circuit and power supply line checked
by an authorized electrician.
Performing maintenance and/or repairing the machine,
when it is not fully disconnected from the power supply,
may cause serious injury and/or death due to electrocution.
Disconnect the power supply before carrying out any
maintenance and/or repair work.
The use of this machine on a circuit which is not grounded
may cause serious injury and/or death due to electrocution.
Never disconnect or disable the grounding conductor. Consult
an electrician, if the ground conductor is missing or it is
suspected that the circuit is not suitably grounded.
The use of this machine with a damaged power supply
cable may cause electric shock. Check the power supply
cable regularly for damage, such as splitting or wear and tear.
DO NOT use the machine, if the power supply cable is
damaged. DO NOT use the electric cable to move
the machine. DO NOT close a door on cord. DO NOT pull
cord around sharp edges or corners.
Bona Belt Manual
CAUTION means:
Damage may occur to
the operator or others if
'CAUTION' alerts on the
machine or in this manual are
ignored or not kept to. Read
and follow all 'CAUTION'
alerts on this machine or in
this manual.
EN
5 5 5