Storage - Kunzle & Tasin Bona Belt Manuel D'utilisation

Operator Safety (Cont).
DO NOT unplug by pulling on power supply cable. To unplug
grasp the plug. DO NOT handle plug or operate machine with
wet hands. DO NOT put any objects into motor openings.
Serious injury and/or death due to electrocution may occur
if the machine runs over the power supply cable and it
becomes damaged. Keep the cable away from the sanding
tool. Always keep the power supply cable raised above the
machine and sand away from the power supply cable.
Performing maintenance or
replacing the dust bag may
cause injury to the operator
or people nearby, if the
machine is connected to the
power supply. Always unplug
the machine when not in use.
DO NOT use solvents or
other flammable products to
clean this machine.
Dry use only. DO NOT use for
liquid recovery, which could
result in motor failure, electric
shock, and electrocution.

Storage

It is advisable to store the machine in its original packaging.
Doing so makes it possible to form a column of two packages
maximum, with one on top of the other.
If the machine is removed from the original packaging and is
not used for some time ensure the wheels and drum are not in
contact with the ground.
6 6
The moving parts on this machine may cause serious injury
and/or damage. Keep hands, feet and loose clothing away
from all moving parts of the machine.
Operating the machine without all guards, doors, or covers in
place can cause an injury or damage.
DO NOT pass with the machine on objects that are hot,
burning or smoking, such as cigarettes, matches or cinders.
Never become distracted
during sanding operations,
check what is happening
continually. Use common
sense. DO NOT use the
machine, if you are tired,
have consumed alcohol or
have taken medication that
may affect your judgement
or your body control.
DO NOT smoke during
sanding operation.
This equipment is for dry use only and must not be used or
kept outside in wet conditions. Store the machine in a dry
building, otherwise the machine could be damaged.
Storage temperature from -20°C to 50°C.
Bona Belt Manual
DO NOT use this machine to
sand steps or furniture. DO
NOT ride on this machine.
DO NOT put any objects into
openings. DO NOT use with
blocked openings. Keep
free from dust, lint, hair or
anything that may reduce
airflow.