Routine Maintenace And Spare Parts; Maintenace; Service; Spare Parts And Exploded Views - Kunzle & Tasin Bona FlexiSand 1.9 Manuel D'utilisation

Routine Maintenace and Spare Parts

Always disconnect the power cable to the machine before it is cleaned, tools are changed, maintenence is
performed or when worn parts are replaced.

Maintenace

To keep the machine in a safe and functioning condition, perform maintenance on the
machine regurarly.
Daily maintenance
• Remove accessories when not in use.
• Use compressed air and a vacuum cleaner to remove dust after each use.
• Wipe the machine and cord o with a clean cloth.
• Check start and stop function.
• Check cord and plug.
Every 250 work hours or at least once a year control of
• Wheels
• Cable stand
• Dust skirt
• Micro switches
• Motor and gearbox
• Handle shaft function including hydraulic system

Service

Bona FlexiSand 1.9 is a high quality machine and is tested by
authorized test sta at the factory before delivery. However,
electrical and mechanical parts wear down and age during
long-term use.
Only Bona's original parts may be used because the machine
is considered unique, otherwise safety functions can become
impaired.

Spare parts and exploded views

On the Internet, you will find a list of spare parts and exploded
views for Bona FlexiSand 1.9 and other machines in our
product range. Visit http://spareparts.bona.com/
During the factory warranty period, repairs may only be carried
by Bona or sta approved by Bona. Other repairs (after the
warranty period) of mechanical or electrical parts on the
20
When you contact Bona or sta approved by Bona in the event
of a fault or to order spare parts, always specify the type and
serial number of your machine. This information is located on
the data plate of the machine.
The machine may never be cleaned using a high pressure
washer or hose.
machine may only be carried out by Bona or sta approved by
Bona who has experience and knowledge concerning safety
regulations.
Bona FlexiSand 1.9 Manual