Christopeit Sport Accord 9904 Notice De Montage Et D'utilisation page 17

Rameur
Masquer les pouces Voir aussi pour Accord 9904:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Computer instructions for 9904(A)
The supplied computer allows the most convenient training. Every value
relevant to training is displayed in a corresponding window.
From the beginning of the training session, the required time, beats / minute,
rower beats, the approximate calory consumption and the beats Total are
displayed. All values are counted from zero upwards.
The computer is switched on by briefly pressing the key or simply by be-
ginning training. The computer begins to register and display all values.
To stop the computer, just stop training. The computer stops all measure-
ments and retains the last attained values. The last attained values in the
functions TIME, ROWER BEATS, CALORIES are stored and training can
continue with these values when training is resumed.
The computer switches of automatically approx. 4 minutes after training
is stopped. All values attained until that time are stored and are displayed
again when training is resumed. It is then possible to continue training from
these values.
Displays:
1. „Zeit" display:
The currently required time is displayed in minutes and seconds.
The values last attained by this function are stored.
2. „Ruderschläge" display:
The current rowing beats are displayed. The values last attained by this
function are stored
3. "Schläge/Minute" (beats per minute) display:
The current speed in beats per minute is displayed. The values most recently
reached can not be saved in this function, as described above.
(Max. display limit is 199 beats per minute)
4. „Kalorien" display:
The current status of the consumed calories (Kcal) is displayed.
The values last attained by this function are stored.
5. „Schläge-Total" display:
The current rowing beats of all trainings sessions are displayed.
The values last attained by this function are stored
6. „SCAN" function:
If this function is selected, the current values of all functions are displayed
successively in a constant sequence approx. every 5 seconds.
Key:
Pressing this key once briefly makes it possible to change from one function
to another. The currently selected function is indicated by an icon in the
respective window.
If the key is held longer (approx. 3 seconds), all last attained values are
deleted with the exception of the values in the "Schläge-Total" display.
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Accord 9904a

Table des Matières