Nebulizer Technical Specifications; Technical Specifications Of Device; Applied Parts; Environmental Conditions - Flaem Respirair Rf7-2 Mode D'emploi

NEBULIZER TECHNICAL SPECIFICATIONS

Model: RF7-2
RF7 Dual Speed Plus nebuliser
Minimum drug capacity:
Maximum drug capacity:

TECHNICAL SPECIFICATIONS OF DEVICE

Model: P0611EM F1000 combined RF7-2
Operating pressure (with neb.):
Release:
(1)
MMAD:
(2)
Respirable fraction < 5 μm (FPF)
(2)
(1) Data collected according to Flaem's internal procedure.
(2) In vitro characterisation performed by TÜV Rheinland Italia S.r.l. in cooperation with the University of Parma. More
details are available on request.

APPLIED PARTS

Type BF applied parts are:
Weight:

ENVIRONMENTAL CONDITIONS

Operating conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
Storage and transport conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure

DURATION

Model: P0611EM F1000
(Compressor unit)
Model: RF7-2
(Nebuliser and accessories)
2 ml
8 ml
0.95 bar.
0.53 ml/min approx.
:
patient accessories (B3, B4, B5)
1.450 kg
Between +10°C and +40°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Between -25°C and +70°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Service life 1000 hours.
The expected average life is 1 year, however it is advisable to replace the
nebuliser every 6 months during intensive use (or sooner if the nebu-
liser is clogged) to ensure maximum therapeutic effectiveness.
20
Speed selector B2.4
in pos Max in pos Min with valve
0.23 ml/min approx.
2.91 μm
76%
2.76 μm
78.5%
OP
Be
sec
on
(so
mu
wi
1.
2.
3. C
4.
5.
6.