Product Description; Nameplate; Emergency Information En; Safety Symbols Marking En - Abicor Binzel BRS-CC Mode D'emploi

2 Product Description

2.5 Nameplate

The maintenance station BRS-CC is labelled with a nameplate on the housing.
When making any inquiries, please remember the following information:
• Device type, device number, ID number, year of construction
2.6 Classification
The warning signs used in the operating instructions are divided into four different levels and are shown prior
to specific work steps. Arranged in descending order of importance, they have the following meaning:
Describes imminent threatening danger. If not avoided, it will result in fatal or extremely critical injuries.
Describes a potentially dangerous situation. If not avoided, it may result in serious injuries.
Describes a potentially harmful situation. If not avoided, it may result in slight or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may result in material damage to the
equipment.
2.7 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electricity, compressed air, gas
Further measures can be found in the "Power supply" operating instructions or in the documentation of further
peripheral devices.
2.8 Safety symbols marking
The safety symbols listed below are attached to the maintenance station BRS-CC in clearly visible and
legible form.
Symbol
EN - 5
DANGER
WARNING
CAUTION
Meaning
Read and observe operating instructions!
Wear eye protection!
Warning against automatic start-up!
Warning against hand injury!
BRS-CC