Illustrations - Miele HS20 Mode D'emploi

en

Illustrations

The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating instruc-
tions.
Connection
Attaching the suction hose
(Fig. 01 + 02)
 Insert the hose connector into the
suction opening on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
 If you want to separate the pieces
again, press the release catches at
the side of the hose connector, and
pull the suction hose out of the suc-
tion opening.
Connecting the suction hose to the
handle (Fig. 03)
 Insert the suction hose into the
handle until it clicks into position.
Connecting the handle to the suction
tube (Fig. 04)
 Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
 To detach the handle from the suction
tube, press the release catch and pull
the handle out of the suction tube,
twisting it slightly as you do so.
36
Connecting the telescopic tube to
the floorhead (Fig. 05)
 Push the telescopic tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into posi-
tion.
 To detach the floorhead from the suc-
tion tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Activating the timestrip® filter
change indicator on the
HEPA AirClean exhaust filter
(Fig. 06–11)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
- Hygiene AirClean SF-HY 60 (tur-
quoise)
- HEPA AirClean SF-HA 60 (white)
If your vacuum cleaner is fitted with a
HEPA AirClean exhaust filter, you need
to activate the timestrip® filter change
indicator.
You will recognise that the
HEPA AirClean exhaust filter is fitted to
the appliance by an indicator strip
hanging out of the exhaust filter com-
partment (Fig. 06).
 Press the release catch on the ex-
haust filter compartment flap and re-
move the flap (Fig. 07).
 Remove the indicator strip from the
HEPA AirClean exhaust filter (Fig. 08).
 Press the timestrip® filter change in-
dicator on the HEPA AirClean exhaust
filter (Fig. 09).