Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en-US
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Connection
Attaching the suction hose
(Figs. 01 + 02)
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
If you want to separate the pieces
again, press the release catches at
the side of the hose connector, and
pull the suction hose out of the suc-
tion opening.
Connecting the suction hose to the
handle (Fig. 03)
Insert the suction hose into the han-
dle until it clicks into position.
Connecting the handle to the suction
wand (Fig. 04)
Insert the handle into the suction
wand until it clicks into position. To
do this, line up the guides on the two
pieces.
To release the handle from the suc-
tion wand, press the release button
and pull the handle out of the wand,
twisting it slightly as you do so.
14
Connect the telescopic suction wand
to the floorhead (Fig. 05)
Push the telescopic suction wand
into the floorhead and turn it clock-
wise or counterclockwise until it
clicks into position.
To detach the floorhead from the suc-
tion wand press the release button
and pull the suction wand away from
the floorhead, twisting it slightly as
you do so.
Activating the TimeStrip® filter
change indicator on the HEPA Air-
Clean exhaust filter (Figs. 06–11)
Depending on the model, your vacuum
cleaner will be equipped as standard
with one of the following exhaust filters:
- Hygiene AirClean SF-HY 60
(turquoise)
- HEPA AirClean SF-HA 60 (white)
If your vacuum cleaner is fitted with a
HEPA AirClean exhaust filter, you need
to activate the TimeStrip® filter change
indicator.
You will recognize that the HEPA Air-
Clean exhaust filter is fitted to the appli-
ance by an indicator strip hanging out
of the exhaust filter compartment
(Fig. 06).
Press the release catch on the ex-
haust filter compartment flap and re-
move the flap (Fig. 07).
Remove the indicator strip from the
HEPA AirClean exhaust filter (Fig. 08).
Press the TimeStrip® filter change in-
dicator on the HEPA AirClean exhaust
filter (Fig. 09).
Publicité
Chapitres
Table des Matières
