References To Illustrations; Preparing For Use - Miele HS11 Instructions D'utilisation

References to illustrations

The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc‐
tions.

Preparing for use

Attaching the suction hose (Fig. 01)
 Insert the hose connector into the
suction socket on the vacuum clean‐
er until it clicks into position. To do
this, line up the guides on the two
pieces.
Disconnecting the suction hose
(Fig. 02)
 Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connecting the suction hose to the
handle (Fig. 03)
 Insert the suction hose into the han‐
dle until it clicks into position.
Connecting the handle to the wand
(Fig. 04)
 Insert the handle into the wand until it
clicks into position. To do this, line up
the guides on the two pieces.
 To release the handle from the wand,
press the release button and pull the
handle out of the wand, twisting it
slightly as you do so.
Adjusting the telescopic wand
(Fig. 05)
One part of the telescopic wand is
packed inside the other and can be ad‐
justed to suit your height for comforta‐
ble vacuum cleaning.
 Press the release button to release
the wands and adjust to the required
height.
Adjusting the standard floor brush
(Fig. 06)
 Push the wand into the floorbrush
and turn it clockwise or counter-
clockwise until it clicks into position.
 To detach the floor brush from the
suction wand, press the release but‐
ton.
en-US
13