Parking, Transport And Storage; Maintenance; Purchasing New Filterbags And Filters - Miele HS11 Instructions D'utilisation

Masquer les pouces Voir aussi pour HS11:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Parking, transport and storage

Park system for pauses during vac‐
uuming (Fig. 25)
The park system allows you to conven‐
iently park the suction wand and floor
brush during pauses.
 Slot the floor brush into the parking
attachment at the back of the vac‐
uum cleaner.
If your vacuum cleaner is on a slop‐
ing surface, e.g., a ramp, retract the
telescopic wand fully.
Park system for storage (Fig. 26)
Always unplug the vacuum
cleaner from the electrical supply
when you have finished using it.
 Stand the vacuum cleaner upright.
Retract the telescopic wand fully so
that the vacuum cleaner takes up less
room for storage.
 Insert the floor brush downwards into
one of the slots on the sides of the
vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.

Maintenance

Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work. Unplug it from
the wall socket.
The Miele filtration system consists of
three filters:
– FilterBag
– Dust compartment filter
– Exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
Only use genuine FilterBags, filters
and accessories with the "Original
Miele" logo on them. This will ensure
that the suction power of the vac‐
uum cleaner is maintained, giving the
best possible cleaning results.
The use of dustbags made from
paper or paper-based materials, or
dustbags with a cardboard collar, or
dustbags that do not carry the "Orig‐
inal Miele" logo, can seriously dam‐
age the vacuum cleaner and invalid‐
ate the warranty.

Purchasing new FilterBags and filters

Original Miele FilterBags and filters can
be ordered from Miele, your Miele deal‐
er or online at:
en-US
17

Publicité

Chapitres

Table des Matières
loading

Table des Matières