Parking, Transport And Storage - Miele Blizzard CX1 Electro Instructions D'utilisation

Masquer les pouces Voir aussi pour Blizzard CX1 Electro:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
Rotary dial (Fig. 13)
 Turn the rotary selector to the suction
power setting you require.
During vacuuming
 When vacuuming, pull the vacuum
cleaner behind you on its wheels. You
can stand it upright for vacuuming
stairs and curtains, etc.
When vacuuming, in particular
fine dust, e.g. drilling dust, sand,
plaster, flour, etc., electrostatic
charges build up naturally. Under
certain conditions these charges will
be released. To avoid the unpleasant
effects of these discharges, a metal
inlay has been incorporated into the
underside of the handle. Please
make sure that you keep your hand
in constant contact with this metal
strip during vacuuming (Fig. 14).
If a large amount of dust is vacuumed
at once, the ComfortClean self-cleaning
function should be started manually ei-
ther during a vacuuming pause or
straight away. This enables the vacuum
cleaner to achieve the very best clean-
ing performance again straight away
(see "Maintenance - Starting the Com-
fortClean self-cleaning function manu-
ally").
Switching the Powerbrush on and off
(Fig. 15)
To use the Electrobrush, it has to be
switched on additionally to the vacuum
cleaner.
 To do this, press the On/Off button 
on the Comfort handle.
16
This means that you can switch the
Electrobrush off during vacuuming and
the vacuum cleaner will continue to op-
erate using suction only, e.g. when
moving from vacuuming a fitted carpet
to a high quality rug, for example.

Parking, transport and storage

Park system for vacuuming breaks
(Fig. 16)
(cannot be used with the Electrobrush)
The Park system allows you to conve-
niently park the wand with the floorhead
during short vacuuming breaks.
 Slot the floorhead or floorbrush into
the parking attachment on the vac-
uum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, then retract
the telescopic wand fully.
Park system for storage (Fig. 17)
Always unplug the vacuum
cleaner from the electrical supply
when you have finished using it.
 Stand the vacuum cleaner upright.
It is a good idea to retract the tele-
scopic wand fully so that the vacuum
cleaner takes up less room for stor-
age.
 Slot the suction nozzle with the park-
ing attachment downwards into the
suction nozzle holder (cannot be
used with the Electrobrush ).
This makes the vacuum cleaner easier
to carry or store.

Publicité

Chapitres

Table des Matières
loading

Table des Matières