Miele Blizzard CX1 Electro Instructions D'utilisation page 7

Masquer les pouces Voir aussi pour Blizzard CX1 Electro:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en - IMPORTANT SAFETY INSTRUCTIONS
Do not pull or carry the vacuum cleaner by the power
cord, and be careful not to damage the cord when with-
drawing the plug from the socket. Keep the cord away
from sharp edges and do not let it get pinched, for exam-
ple, under a door. Avoid running the vacuum cleaner over
the cord. This could damage the cord, plug or socket. The
appliance must not be used if any of these have suffered
damage.
Do not use the vacuum cleaner if the cord is damaged. If
the power cord is damaged it should be replaced along
with a new cord reel by Miele Technical Service.
When vacuuming, in particular fine dust, e.g. sawdust,
sand, plaster, flour, talcum powder etc., electrostatic
charges build up naturally. Under certain conditions these
charges will be released. To avoid the unpleasant effects of
these discharges, a metal inlay has been incorporated into
the underside of the handle. Please make sure that you
keep your hand in constant contact with this metal strip
during vacuuming.
Repairs should only be carried out by a Miele-authorized
service technician. Repairs and other work by unqualified
persons can cause considerable danger to users.
Cleaning
Do not let the vacuum cleaner, the Electrobrush, the
telescopic wand and the suction hose get wet.
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières