For safety reasons, do not lift the
vacuum cleaner using the dust con-
tainer carrying handle.
Maintenance
Always switch off the vacuum
cleaner for maintenance work and
unplug the power chord from the
wall socket.
Emptying the dust
container (Fig. 18 - 23)
Empty the dust container at the latest
when the dust has reached the max
marking on the dust container.
Pull the dust container handle up-
wards.
Remove the dust container upwards.
The contents of the box can be dis-
posed of with the normal household
waste, providing it contains general
household dust only.
Hold the dust container close to the
trash can so that as little dust billows
out as possible.
Press the yellow release button on
the bottom of the dust container.
The flap will open and the dust will fall
out.
Close the flap so that it clicks audibly.
Insert the dust container into the vac-
uum cleaner from above so that it au-
dibly clicks into place.
Push the handle down.
Cleaning the dust container
Clean the dust container as required.
Clean the dust container using water
and liquid dish soap.
Dry the dust container carefully.
Cleaning the filter frame (Fig. 24 + 25)
A removable filter frame is located in the
dust container. This should be cleaned
if it is obviously dirty.
Place the emptied and open dust
container on its front.
Release the filter frame and remove it.
Empty the filter frame and rinse it un-
der cold running water.
Do not use liquid dish soap!
Do not use any sharp or pointed ob-
jects!
Dry the filter frame carefully!
Place the dry filter frame in the dust
container so that it audibly clicks into
place.
Cleaning the fine dust filter
The fine dust filter is equipped with a
self-cleaning function. When a specified
degree of soiling is reached, the vac-
uum cleaner switches off automatically
for approx. 20 seconds and carries out
a cleaning process. You will hear this
process running.
The ComfortClean button on the vac-
uum cleaner lights up yellow.
en
17