Parking, Transport And Storage; Maintenance - Miele SCAE0 Mode D'emploi

en-US
Opening the air inlet valve (Fig. 22)
It is easy to reduce the suction power
for a short time, e.g., to prevent rugs or
other objects being sucked into the
vacuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
This reduces the suction on the respec-
tive nozzle used.
During vacuuming
 When vacuuming, pull the vacuum
cleaner behind you on its wheels. You
can stand it upright for vacuuming
stairs and curtains, etc.

Parking, transport and storage

Park system for pauses during
vacuuming (Fig. 23)
The park system allows you to conve-
niently park the suction wand and floor-
head during pauses.
 Slot the floorhead into the parking at-
tachment on the vacuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g., a ramp, retract the
telescopic suction wand fully.
16
Park system for storage (Fig. 24)

Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Remove
the plug from the socket.
 Stand the vacuum cleaner upright.
It is a good idea to retract the tele-
scopic suction wand fully.
 Slot the floorhead downwards into
one of the parking attachments on ei-
ther side of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.

Maintenance


Always switch off the vacuum
cleaner for maintenance work and
remove the plug from the outlet.
The Miele filtration system consists of
three components:
– Original Miele FilterBag
– Motor protection filter
– Original Miele exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.