Putting The Fine Dust Filter And The Filter Mat Together; Cleaning The Filter Frame And Pre-Filter - Miele Boost CX1 Mode D'emploi

Putting the fine dust filter and the fil-
ter mat together
 Attach the dry filter mat to the dry fine
dust filter so that the soft side of the
filter mat is pointing up and the loop
used to remove it is visible (Fig. 35).
 Fit the fine dust filter carefully in the
dust container (Fig. 36).
 Press the fine dust filter firmly into
position.
In order to continue to achieve the
best possible cleaning results replace
the CX FSF fine dust filter with a new
one after approx. 3 years.
 Reinsert the dust container in the
vacuum cleaner (Fig. 28).
Cleaning the filter frame and pre-
filter (Figs. 37–41)
There is a removable filter frame on the
rear side of the dust container side flap.
Behind the side flap is a pre-filter.
Clean both parts whenever necessary.
 Remove the dust container (Fig. 26).
 Lift up the dust container handle and
hold it in this position (Fig. 37).
 Press the release catch on the side
flap. There is a cut-out on the oppo-
site side to make it easier to remove
the side flap.
 Remove the side flap.
Once the side flap has been removed,
the pre-filter inside can be accessed.
 Clean the pre-filter and the side walls
on the inside using the cleaning tool
(Fig. 38).

Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the pre-filter.
 If you need to clean the interior side
walls, use a slightly damp cloth and
mild liquid dish soap.
 Dry the interior side walls carefully.
The filter frame is located on the rear
side of the removed side flap at the bot-
tom.
 Press the two release catches on the
side of the filter frame and remove the
filter (Fig. 39).
 Clean the filter using the cleaning
tool.

Risk of damage caused by incor-
rect cleaning.
The filter can become damaged and
be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the filter.
 If you need to clean the filter frame
and the side flap, use a slightly damp
cloth and mild liquid dish soap.
 Dry the filter frame and the side flap
carefully.
 Refit the filter at the bottom of the dry
filter frame and lock it, making sure it
clicks into position (Fig. 40).
 Carefully fit the dry side flap with the
filter frame at the bottom of the dust
container (Fig. 41).
en-US
19