Setting Down And Storing The Vacuum Cleaner - Miele Boost CX1 Mode D'emploi

Regulating the suction power
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to
manoeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the power levels are suitable for.
 Curtains, fabric
 Deep-pile carpets, rugs, and
runners
 Low-pile carpet and rugs
 Hard floors and heavily soiled
carpets and rugs (also for
cleaning upholstery and
mattresses with the upholstery
nozzle)
When using the adjustable floorhead,
if the suction seems too high, reduce
the suction power until the floorhead
is easier to manoeuvre.
 Turn the suction power selector to the
power level you require, making sure
it clicks into position (Fig. 22).
Opening the air inlet valve (Fig. 23)
It is easy to reduce the suction power
for a short time, e.g., to prevent rugs or
other textile flooring being sucked into
the vacuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to
manoeuvre.
Setting down and storing the
vacuum cleaner

Risk of electric shock from
voltage.
The supply voltage is applied to the
appliance even if it is switched off.
After use, unplug the appliance from
the electrical socket.
Park system (Fig. 24)
 Retract the telescopic suction tube
fully.
 Slot the floorhead or floorbrush into
the park system from above.
Do not lift the vacuum cleaner by the
dust container carrying handle when
transporting it.
Always use the vacuum cleaner
carrying handle.
en-CA
39