Parking And Storing The Vacuum Cleaner; Maintenance; Purchasing Filter Bags And Filters - Miele Swing H1 Instructions D'utilisation

en
It is important, however, to observe
the cleaning and care instructions of
the floor covering manufacturer.
Vacuum carpets and rugs with
recessed bristle strip:
^ Press the foot switch marked %.
Vacuum smooth floors with exposed
bristle strip:
^ Press the foot switch marked ).
Always vacuum floors with very
deep seams or gaps with the rug
and floor tool with exposed bristle
strip.
Parking and storing the
vacuum cleaner
There is a non-skid rubber bumper on
the vacuum cleaner handle. This allows
the vacuum cleaner to be leaned
upright against a wall if desired (see
fig. 17).
Before leaving the vacuum cleaner
make sure it is turned off and
leaning against a wall at a safe
angle.
To protect the bristle rings on the rug
and floor tool, we suggest hanging
the vacuum cleaner up.
For storage you can hang up the vacuum
cleaner easily. There is a hole for this
located on the handle (see fig. 18).
12

Maintenance

,
Always turn off and unplug the
vacuum cleaner before performing
any maintenance work.
The Miele filter system consists of three
components (see fig. 19).
a Filter bag
b Dust compartment filter
c Exhaust filter
Each of these components must be
changed periodically to maintain the
vacuum cleaner's efficiency.
Only use Miele filter bags, filters and
accessories with the "Original Miele"
logo. Only then can the suction
power of the vacuum cleaner reach
its optimum potential creating the
best possible cleaning results.
,
The use of filter bags made of
paper or a similar material, or filter
bags with a cardboard retaining
plate can lead to serious damage to
the vacuum cleaner and possibly
voiding the warranty, just as with the
use of filter bags without the
"Original Miele" logo.

Purchasing filter bags and filters

Original Miele filter bags and filters can
be purchased from an authorized Miele
vacuum dealer or by visiting the Miele
store at http://store.miele.com.