How To Change The Filter Bag; When To Change The Dust Compartment Filter (Motor Protection); Replacing The Dust Compartment Filter; When To Change The Exhaust Filter - Miele Swing H1 Instructions D'utilisation

Masquer les pouces Voir aussi pour Swing H1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en

How to change the filter bag

(see fig. 21, 22 + 23)
^ Press the dust compartment release
button, raise the lid until it clicks into
place.
^ Grasp the collar by the two finger
holes, move it away from the suction
nozzle and pull it out from the filter
bag holder.
The filter bag has a flap which closes
automatically to prevent dust from
escaping when the filter bag is
removed.
^ Insert the new filter bag as far as it
will go into the yellow filter bag
holder. Do not unfold the filter bag
when taking it out of the box.
^ Unfold the filter bag in the dust
compartment as far as possible.
^ Close the dust compartment lid until
it clicks into place. Take care not to
jam the filter bag in the lid.
,
A no-bag demobilizer blocks the
dust compartment lid from closing if
no filter bag is inserted or if it is not
inserted all the way. Do not force it
closed.
When to change the dust
compartment filter (motor protection)
Whenever you open a new box of Miele
filter bags, a dust compartment filter is
included in every box of genuine Miele
filter bags.
14
Replacing the dust compartment
filter (see fig. 24)
^ Open the compartment lid.
^ Open the yellow filter cartridge,
remove the old filter
^ and replace it with a new one.
^ Snap the filter catridge shut and
^ close the dust compartment lid firmly.

When to change the exhaust filter

Depending on the model, one of the
following standard exhaust filters is
installed (see fig. 25).
a AirClean
Replace this exhaust filter whenever
you open a new box of Miele filter bags.
An AirClean exhaust filter is included in
every box of genuine Miele filter bags.
b Active AirClean
c HEPA
Replace these exhaust filters about
once a year. You can note the date on
the exhaust filter.

Replacing the "AirClean" filter

(see fig. 26, 27 + 28)
Make sure that only one exhaust
filter is installed.
^ Press the release button for the
exhaust filter compartment on the
rear of the vacuum cleaner and
remove the lid.
^ Remove the used AirClean exhaust
filter by the clean space (see arrow)
^ and replace it with a new one.

Publicité

Chapitres

Table des Matières
loading

Table des Matières