Before Using The Vacuum Cleaner; Using The Included Accessories - Miele Swing H1 Instructions D'utilisation

en
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
Before using the vacuum
cleaner
Connecting the suction wand
(see fig. 1)
^ With the square hole facing the
carrying handle, insert the wand into
the top of the vacuum cleaner body.
Gently turn the tube until it locks in
place.
Removing the suction wand
^ Press and hold the release button
(see arrow) while gently turning and
pulling off the handle.
Connecting the handle and suction
wand (see fig. 2)
^ Line up the square hole and the
locking button, insert the handle into
the suction wand. Gently turn the
handle until it locks in place.
^ To detach the two parts, press and
hold the release button while gently
turning and pulling off the handle.
The handle can also be fitted directly to
the vacuum cleaner housing (see fig. 3).
This allows for easier vacuuming of
upholstered furniture, mattresses, etc.
10
Connecting the standard floor brush
(see fig. 4)
^ Insert the lower tube of the vacuum
cleaner into the standard floor brush
and gently turn until it locks into
place.
^ To remove the floor brush press and
hold the release button (see arrow)
while gently pulling the standard floor
brush off.
You can also attach the suction wand to
the nozzle of the vacuum cleaner (see
fig. 5).
This makes it easier to clean under
furniture that is close to the floor.
Winding up the power cord (see fig. 6)
When the vacuum cleaner is not in use
the power cord can be wound around
the two cord hooks.
To prevent the cord from unwinding,
press the cord into the cable clip (see
detail).

Using the included accessories

(see fig. 7)
The vacuum cleaner includes the
following accessories:
a Accessory clip
(depending on model)
b Crevice nozzle
For cleaning in folds, crevices and
corners.
c Upholstery nozzle
For cleaning upholstered furniture,
mattresses, cushions, curtains, etc.