References To Figures; Connection - Miele Boost CX1 Mode D'emploi

en-CA

References to figures

The figures referred to in the sections
are on the fold-out pages at the end of
these operating instructions.

Connection

Attaching the suction hose
(Figs. 01 + 02)
 Insert the hose connector into the
suction opening on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
 If you want to separate the pieces
again, press the release buttons at
the side of the hose connector, and
pull the suction hose out of the
suction opening.
Connecting the suction hose to the
handle (Fig. 03)
 Insert the suction hose into the
handle until it clicks into position.
Connecting the handle to the suction
tube (Fig. 04)
 Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
 To detach the handle from the suction
tube, press the release button and
pull the handle out of the suction
tube, twisting it slightly as you do so.
36
Connecting the telescopic suction
tube to the adjustable floorhead
(Fig. 05)
 Push the telescopic suction tube into
the floorhead and turn it clockwise or
counterclockwise until it clicks into
position.
 To detach the floorhead from the
suction tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Activating the TimeStrip® filter
change indicator on the
HEPA AirClean exhaust filter
(Figs. 06–11)
Depending on the model, your vacuum
cleaner will be equipped as standard
with one of the following exhaust filters:
- Hygiene AirClean SF-HY 60
(turquoise)
- HEPA AirClean SF-HA 60 (white)
If your vacuum cleaner is fitted with a
HEPA AirClean exhaust filter, you need
to activate the TimeStrip® filter change
indicator.
You will recognize that the
HEPA AirClean exhaust filter is fitted to
the appliance by an indicator strip
hanging out of the exhaust filter
compartment (Fig. 06).
 Press the release catch on the
exhaust filter compartment flap and
remove the flap (Fig. 07).
 Remove the indicator strip from the
HEPA AirClean exhaust filter (Fig. 08).