Gaggenau AC2001.1 Manuel D'utilisation Et Notice D'installation page 29

Open the filter cover.
2.
Grasp the front corners of the filter cover and
‒
pull it down in a single, swift motion.
Undo the hinge lock and remove the filter cover.
3.
Remove the grease filters.
4.
To avoid causing damage, do not bend the grease
filters.
Undo the control panel cabling and cabling for the
5.
lighting.
Undo the screws in the frame
6.
frame .
and remove the
Installing the appliance
Insert the appliance into the opening in the fitted
1.
unit and screw it to the fitted unit
Tighten the fastening screws.
2.
Attach the frame and screw it to the appliance from
3.
below.
4. Secure the frame and the appliance with screws.
If the screws are not accessible from the exterior,
the screws can also be fitted from the interior.
Installation instructions en
⁠ .
29