General Safety Rules; Work Area Safety; Electrical Safety; Personal Safety - Panasonic EYFEA1N Instructions D'utilisation

Table des Matières

Publicité

I. INTRODUCTION
These tools can be used to tighten
screws in clutch mode and to drill
holes in wood and metal in drill mode.
Additionally, model EYFEA1N can be
used to drill holes in soft concrete and
similar materials in hammer mode.
II. GENERAL SAFETY
RULES
WARNING! Read all instructions
Failure to follow all instructions listed
below may result in electric shock, fire
and/or serious injury. The term "power
tool" in all of the warnings listed below
refers to your main operated (corded)
p o w e r t o o l a n d b a t t e r y o p e r a t e d
(cordless) power tool.
SAVE THESE INSTRUCTIONS

Work Area Safety

1) Keep work area clean and well lit.
C l u t t e r e d o r d a r k a r e a s i n v i t e
accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
3) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.

Electrical Safety

1) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
2) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
3) Do not expose power tools to rain
or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
4) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
5) W h e n o p e r a t i n g a p o w e r t o o l
outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.

Personal Safety

1) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication.
A m o m e n t o f i n a t t e n t i o n w h i l e
operating power tools may result in
personal injury.
2) Use safety equipment. Always wear
eye protection.
S a f e t y e q u i p m e n t s u c h a s d u s t
mask, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
3) Avoid accidental starting. Ensure
the switch is in the off position
before plugging in.
Carrying power tools with your finger
on the switch or plugging in the power
tools that have the switch on invites
accidents.
- 3 -

Publicité

Table des Matières
loading

Table des Matières