Ttb Safety Device - WANDERS Bordeaux Orsanne Mode D'emploi Et Instructions D'installation

Check the whole unit with soap water or a gas-leak detector after fitting the pipe.
Avoid tension on the gas unit when fitting the gas pipe.
2.5 Maintenance
Have the fireplace checked and cleaned by an authorised professional every year to guarantee proper
and safe operation of the stove.
The burner unit consists of a pilot flame and a combustion chamber.
The ceramic glass pane can be cleaned by a cleaning agent specially intended for ceramic cookers.
If a log is broken, it must be replaced.
If there is a crack in the glass window or if the pane is broken, it must be replaced before operating the
gas hearth.
When replacing the log set, be sure to place them in the correct position (see ´placing the log set´).

2.6 TTB safety device

This gas hearth is provided with a TTB draught breaker, wind diverter and thermal reflux valve.
2.7 Log set
Firstly, fill the burner plate with the enclosed grains (see illustration 5a).
Then place the enclosed chips at the front side of the burner between the logs.
Illustration 5a
Caution! Never use
more grains than the
supplied quantity.
Now put the logs into
place according to
illustrations 5a and
5b.
When putting the
logs into place, make
sure that none of the
logs covers the pilot
flame.
Be sure to place the
Illustration 5b
logs exactly as the
example, so as to
cover the flames as
less as possible and
to prevent the flames
from interruption
and to avoid soot
deposits.
Make sure that the
glass window is firmly
closed before lighting
the hearth.
16