Connecting The Flue; Extra Air Inlet; Connecting The Gas Pipe - WANDERS Bordeaux Orsanne Mode D'emploi Et Instructions D'installation

figuur 1 figuur 2
figuur 3 figuur 4

2.3 Connecting the flue

The gas fire is provided with an open draught breaker with wind
diverter.
Use corrosion-resistant material for the connection between the
hearth and the chimney flue.
The inner diameter of the pipe must be at least 100mm.
The connection between the hearth and the chimney flue must
be sound and leakage proof.

2.3.1 Extra air inlet

WANDERS recommends adding extra air inlets with all built in
stoves.

2.4 Connecting the gas pipe

Place an approved gas tap measuring 3/8" in the gas pipe leading to the control unit.
Make sure that the tap is easily accessible.
The connection to the gas unit must measure 3/8".
15