Switching The Appliance On And Off, Adjusting The Detection Range - Parkside PWT 11 A1 Mode D'emploi

Switching the appliance on and off, adjusting the detection
range
The sensor sensitivity controller r is located on the rear side of the
appliance. The sensor sensitivity controller r has an adjustable range
of 0 to 9.
Level 0: The appliance is switched off.
■
Level 1–9: the higher the level, the more sensitive the motion sensor 9
■
becomes and the detection range is increased.
Small animals
Detection range 3 m
Detection range 4.5 m
Medium-sized animals
Detection range 3 m
Detection range 4.5 m
Detection range 6 m
Large animals
Detection range 4 m
Detection range 5 m
Detection range 7 m
NOTE
Uninvolved third parties who are larger than large animals can be
►
detected beyond 7 metres.
Turn the sensor sensitivity controller r clockwise to switch the appli-
♦
ance on and increase the detection range.
Turn the sensor sensitivity controller r anticlockwise to reduce the
♦
detection range.
Turn the sensor sensitivity controller r anticlockwise to level 0 to
♦
switch the appliance off.
│ GB │ IE │ NI
■ 12
Level 6–7
Level 8–9
Level 4–5
Level 6–7
Level 8–9
Level 1–3
Level 4–6
Level 7–9
PWT 11 A1