Activating The Appliance; Dismantling - Parkside PWT 11 A1 Mode D'emploi

Activating the appliance

NOTE
Complete all settings before switching on the appliance.
►
Turn the sensor sensitivity controller r clockwise to switch the appli-
♦
ance on.
Activate the appliance by placing one hand in front of the motion
♦
sensor 9. The LED briefly lights up red and a click can be heard.
The appliance is activated and the water valve has opened up.
The appliance is now ready for use.
Switch on the water tap.
♦
NOTE
Switch off the tap before you move into the detection field of the
►
appliance.

Dismantling

Switch off the water tap.
♦
Turn the sensor sensitivity controller r anticlockwise to level 0 to
♦
switch the appliance off.
Disconnect the garden hose from the garden hose connection z.
♦
Unscrew the sprinkler unit 3 in an anticlockwise direction from the
♦
connecting piece 6.
Unscrew the connecting piece 6 in an anticlockwise direction from
♦
the main unit 8.
Unscrew the main unit 8 in an anticlockwise direction from the
♦
extension tube t.
Unscrew the extension tube t in an anticlockwise direction from
♦
the ground spike u.
PWT 11 A1
GB │ IE │ NI │
13 ■