Operation; Adjusting The Water Jet - Parkside PWT 11 A1 Mode D'emploi

Operation

NOTE
Make sure the water tap is closed when you move into the detec-
►
tion area of the appliance.

Adjusting the water jet

You have two options when adjusting the water jet that comes out of
the sprinkler unit 3.
Adjusting the width:
Press the locking lever 2 down and turn the rotary control 1 in
♦
the MAX direction to increase the width of the water jet (see Fig. 5).
When you turn the rotary control 1 completely in the MAX direc-
tion, the appliance can spray water up to a distance of 11 metres
when operating at 4 bar.
Press the locking lever 2 down and turn the rotary control 1
♦
towards MIN to reduce the width of the water jet (see Fig. 5).
DISTANCE
Fig. 5
│ GB │ IE │ NI
■ 10
PWT 11 A1